3 Rows of 8 (3 x 8) Low Loader

3x8 Fixed Width Low Loader with rear steer

3x8 Fixed Width Low Loader with rear steer

3x8 Swing Wing Low Loader clear cut

3x8 Swing Wing Low Loader

3x8 Swing Wing Widening - AU

3x8 Swing Wing Widening Low Loader

Up to 41t Payload (QLD)

Increase payload by over 20t with a 2x8 dolly.

Our in-house design and engineering team work with you to achieve the best solution for your operaitons. All of our trailers come with TRT's standard quality features and finishes to ensure that your low loader is returning its investment ...for the long haul.  

We have a range of 3x8 low loader options to suit your payloads and operating environment:

  • Swing wing widening  
  • Fixed width with rear steer 

TRT are able to manufacture to your required deck length to suit varied machines. View the drawings and specifications for each model below. If you're not sure which trailer is best for your operation, use our Trailer Selector tool or get in touch with one of our team.

3x8 Swing Wing Widening - AU

3x8 Swing Wing Widening Low Loader - AU

  • Widens: 2.5m closed to 4.2m open.
  • Payload: Up to 62t with dolly.
  • Widening: No pinning required, widen to any width.
  • Suspension: New swivel ball end on ram increases oscillation.

Make widening the trailer easy. With no locking pins to worry about, the trailer can widen to any width to suit your machine or road width. If you need to lift an axle there is a simple lever at each axle, again no pinning or chaining of axles. The double acting suspension not only provides easy axle lift but increases the stability over single acting systems.

3x8 Fixed Width 1 Rear Steer - NZ

3x8 Fixed Width with Rear Steer

  • Width: 3.05m
  • Axle Lift: All axles aee able to lift independently.
  • Steering: Less tyre wear, chassis stress and fuel burn.

If you operate in areas where roads and bridges are narrow or where widening trailers cant be considered. Built with a shorter deck length and rear steeríng axle this trailer will work well on tight forestry or steep windy roads. The steer axle can be remote controlled to make getting into those tight areas even easier. For wider plant & equipment that require more support we offer Outrigger provision in the coaming rail. 

Drawings and specifications shown are for NZ, contact us for Australian options.

Spec 3x8 Fixed Width with Rear Steer - NZ

Spec 3x8 Swing Wing Widen - AU

Drawing 3x8 Swing Wing Widen - AU

Spec 3x8 Swing Wing Widen - NZ

Drawing 3x8 Fixed Width with Rear Steer - NZ

Drawing 3x8 Swing Wing Widen - NZ


For advice on the best low loader options, give us a call on 07 3890 8800 for more information or send us a message.