4x4 - Rows of 4 Low Loaders

• Widens: 2.5m closed to 3.5m open.
• Stability: Wheels widen with decks to suit plant & equipment width.
• Suspension: Double acting hydraulic suspension - all axles lift.
• Widening Stool: Lifts wheels off road when widening - protects Bitumen.

Where the trailer needs to widen to the width of the plant and equipment to provide maximum stability, this trailer meets the brief. The double acting hydraulic suspension provides added stability and allows the operator to lift axles independently. This low loader can widen in various increments to suit the load.

• Width: Options from 2.5m to 3.1m
• Steering: Less tyre wear and increased cornering
• Chassis: Full depth with axles set through gives the lowest height and strongest beavertail for loading.

A simple to operate trailer where widening isn’t required.  This trailer combination can be supplied with a swept path certificate for unrestricted travel. Spaced axle groups provide increased payloads, and the steer axle increases manoeuvrability.

Optional widths and deck lengths.

• Mid Tip Deck: Hydraulically operated, access to top deck.
• Steering: Less tyre wear and increased cornering

This is the ideal trailer for roading operators, where multiple machines, plant, and equipment are being transported to one site. The full width mid tipping deck provides safe access to the top deck and can carry 12 tonne in the raised position. Lowered on its air suspension, with double fold ramps provides a very shallow loading angle.

• Widens: 2.5m closed to 3.5m open.
• Stability: Wheels stay at 2.5m whilst decks widen
• Suspension: Either hydraulic or air.
• Axle Lift: All axles are able to lift independently.
• Steering: Less tyre wear, chassis stress & fuel burn.

With wheels at 2.5m whilst the decks can widen to 3.5m this trailer provides the solution where access is difficult due to narrow roads and roundabouts, whether in Metro areas or on forestry roads. With steering axles, manoeuvrability is increased, when fitted with hydraulic suspension you maximise stability and enable the operator to lift axles.

• Widens: 2.5m closed to 3.5m open.
• Stability: Wheels widen with decks to suit plant & equipment width.
• Suspension: Double acting hydraulic suspension increase stability.
• Steering: Less tyre wear, chassis stress & fuel burn.

Where the trailer needs to widen to the machine, plant or equipment width and provide maximum stability this trailer meets the brief. For increased manoeuvrability, 2 steering axles can be fitted at the rear of the trailer. Double acting hydraulic suspension provides added stability and allows the operator to lift axles independently. With widening stool fitted, the ground is protected from damage with all wheels off the ground.